DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
438
Log Description Severity
Log Message: RADIUS server <server-ip> assigned <direction> bandwidth: <threshold>
to port <interface-id> (Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
direction: It indicates the direction for bandwidth control, e.g.: ingress or egress.
threshold: The assign threshold of bandwidth that authorized by from RADIUS server.
interface-id: It indicates the port number of the client authenticated.
username: It indicates the username for authentication.
Event description: RADIUS assigned a valid priority attributes.
Log Message: RADIUS server <server-ip> assigned 802.1p default priority: <priority> to
port <interface-id> (Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
priority: The assign priority that authorized by from RADIUS server.
interface-id: It indicates the port number of the client authenticated.
username: It indicates the username for authentication.
Informational
Event description: RADIUS assigned ACL script but fails to apply to the system due to
insufficient resource.
Log Message: RADIUS server <server-ip> assigns <username> ACL failure at port
<interface-id> (<acl-script>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
username: It indicates the username for authentication.
interface-id: It indicates the port number of the client authenticated.
acl-script: The assign ACL script that authorized by from RADIUS server.
Warning
ARP
Log Description Severity
Event description: Gratuitous ARP detected duplicate IP.
Log Message: Conflict IP was detected with this device (IP: <ipaddr>, MAC:
<macaddr>, Port <[unitID:]portNum>, Interface: <ipif_name>).
Parameters description:
ipaddr: The IP address which is duplicated with our device.
macaddr: The MAC address of the device that has duplicated IP address as our device.
unitID: 1.Interger value;2.Represent the id of the device in the stacking system.
portNum: 1.Interger value;2.Represent the logic port number of the device.
ipif_name: The name of the interface of the Switch which has the conflict IP address.
Warning
Auto-save
Log Description Severity
Event description: Record the event when the configure information of DDP is saved
automatically.
Log Message: [Unit <unitID>, ]Configuration automatically saved to flash due to
configuring from DDP(Username: <username>, IP: <ipaddr>)
Parameters description:
Unit: Box ID
username: Represent current login user.
Informational
To Next Page
Loading...
