DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
372
SSL Global Settings
This window is used to display and configure the global SSL settings.
To view the following window, click Security > SSL > SSL Global Settings, as shown below:
Figure 9-836 SSL Global Settings Window
The fields that can be configured in SSL Global Settings are described below:
Parameter Description
SSL Status Select to enable or disable the global SSL status here.
Service Policy Enter the service policy name here. This name can be up to 32 characters long.
Click the Apply button to accept the changes made.
The fields that can be configured in Import File are described below:
Parameter Description
File Select Select the file type that will be loaded here. Options to choose from are
Certificate and Private Key. After selecting the file type, browse to the
appropriate file, located on the local computer, by pressing the Browse button.
Destination File Name
Enter the destination file name used here. This name can be up to 32
characters long.
Click the Apply button to accept the changes made.
Crypto PKI Trustpoint
This window is used to display and configure the crypto PKI trust point settings.
To view the following window, click Security > SSL > Crypto PKI Trustpoint, as shown below:
To Next Page
Loading...
