DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
245
Parameter Description
Shutdown Select to enable or disable the shutdown feature here. This feature is used to
disable a virtual router on an interface. Avoid the common mistake of shutting
down the IP address owner router before shutting down other non-owner
routers.
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
VRRPv3 Settings
This window is used to display and configure the VRRP version 3 (VRRPv3) settings.
To view the following window, click L3 Features > VRRPv3 Settings, as shown below:
Figure 6-91 VRRPv3 Settings Window
The fields that can be configured are described below:
Parameter Description
VLAN Enter the ID of the VLAN interface that will be used here. The range is from 1 to
4094.
VRID Enter the ID of the virtual router that will be created here. The range is from 1 to
255.
Address Family Select the address family used here. Options to choose from are:
• IPv4 - Specifies to create an IPv4 virtual router.
• IPv6 - Specifies to create an IPv6 virtual router.
Interface Name Enter the name of the VLAN interface that will be used in the display here. This
string can be up to 12 characters long.
Click the Apply button to accept the changes made.
Click the Find button to find and display an entry based on the information entered.
Click the Edit button to configure more detailed settings of the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
