DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
103
Click the Apply button to accept the changes made for each individual section.
After selecting the MAC Notification History tab, at the top of the page, the following page will be available.
Figure 5-8 MAC Notification (MAC Notification History) Window
On this page, a list of MAC notification messages will be displayed.
VLAN
802.1Q VLAN
This window is used to display and configure the VLAN settings on this Switch.
To view the following window, click L2 Features > VLAN > 802.1Q VLAN, as shown below:
Figure 5-9 802.1Q VLAN Window
The fields that can be configured in 802.1Q VLAN are described below:
Parameter Description
VID List Enter the VLAN ID list that will be created here.
Click the Apply button to create a new 802.1Q VLAN.
Click the Delete button to remove the 802.1Q VLAN specified.
The fields that can be configured in Find VLAN are described below:
Parameter Description
VID Enter the VLAN ID that will be displayed here.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to locate all the entries.
Click the Edit button to re-configure the specific entry.
To Next Page
Loading...
