DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
373
Figure 9-847 Crypto PKI Trustpoint Window
The fields that can be configured are described below:
Parameter Description
Trustpoint Enter the name of the trust-point that is associated with the imported
certificates and key pairs here. This name can be up to 32 characters long.
File System Path Enter the file system path for certificates and key pairs here.
Password
Enter the encrypted password phrase that is used to undo encryption when the
private keys are imported here. The password phrase is a string of up to 64
characters. If the password phrase is not specified, the NULL string will be
used.
TFTP Server Path Enter the TFTP server path here.
Type
Select the type of certificate that will be imported here. Options to choose from
are Both, CA, and Local.
• Selecting Both specifies to import the CA certificate, local certificate and
key pairs.
• Selecting CA specifies to import the CA certificate only.
• Selecting Local specifies to import local certificate and key pairs only.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
SSL Service Policy
This window is used to display and configure the SSL service policy settings.
To view the following window, click Security > SSL > SSL Service Policy, as shown below:
To Next Page
Loading...
