DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
230
OSPFv3 Neighbor Table
This window is used to find and display the OSPFv3 neighbor information.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Neighbor Table, as shown below:
Figure 6-67 OSPFv3 Neighbor Table Window
The fields that can be configured are described below:
Parameter Description
Interface Name Enter the name of the interface here.
Neighbor Enter the OSPF neighbor ID here. It can be specified as an IPv4 address.
Click the Find button to locate a specific entry based on the information entered.
Click the Show Detail button to view more detailed information for the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will appear.
Figure 6-68 OSPFv3 Neighbor Table (Show Detail) Window
Click the Back button to return to the previous window.
IP Multicast Routing Protocol
IGMP
IGMP Interface Settings Page
This window is used to display and configure the IGMP interface settings.
To Next Page
Loading...
