DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
318
Figure 9-28 Accounting Settings (AAA Accounting Commands) Window
The fields that can be configured are described below:
Parameter Description
Level Select the privilege level used here. Options to choose from are levels 1 to 15.
List Name Enter the method list name that will be used with the AAA accounting
commands option here.
Method 1 ~ Method 4
Select the method lists that will be used for this configuration here. Options to
choose from are none, group, and tacacs+. The none option is only available
for Method 1.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
RADIUS
RADIUS Global Settings
This window is used to display and configure the global RADIUS settings.
To view the following window, click Security > RADIUS > RADIUS Global Settings, as shown below:
Figure 9-29 RADIUS Global Settings Window
The fields that can be configured in RADIUS Global Settings are described below:
Parameter Description
DeadTime Enter the dead time value here. This value must be between 1 and 1440
minutes. By default, this value is 0 minutes. When this option is 0, the
unresponsive server will not be marked as dead. This setting can be used to
To Next Page
Loading...
