DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
77
To view the following window, click Management > IP Source Interface, as shown below:
Figure 4-605 IP Source Interface Window
The fields that can be configured in IP TFTP Source Interface are described below:
Parameter Description
Source Interface State Select to enable or disable the IP TFTP source interface state here.
Interface Type
After enabling the Source Interface State option, select the interface type here.
Options to choose from are Loopback, Mgmt, and VLAN.
VID Enter the interface ID here. For loopback interfaces this value is from 1 to 8.
For the management interface (Mgmt) this value can only be 0. For VLAN
interfaces this value is from 1 to 4094.
Click the Apply button to accept the changes made.
File System
This window is used to view, manage and configure the Switch file system.
To view the following window, click Management > File System, as shown below:
Figure 4-616 File System Window
The fields that can be configured are described below:
Parameter Description
Unit Select the Switch unit that will be used for this configuration here.
Path Enter the path string.
Click the Go button to navigate to the path entered.
Click the Copy button to copy a specific file to the Switch.
Click the c: hyperlink to navigate the C: drive
To Next Page
Loading...
