DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide 
112 
The fields that can be configured are described below: 
Parameter  Description 
VLAN Mode  Select the VLAN mode option here. Options to choose from are Access, 
Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous, 
and Trunk Secondary. 
Acceptable Frame  Select the acceptable frame behavior option here. Options to choose from are 
Tagged Only, Untagged Only, and Admit All. 
Ingress Checking  Select to enable or disable the ingress checking function. 
Native VLAN  Tick this option to enable the native VLAN function. 
VID 
After ticking the Native VLAN option the following parameter will be available. 
Enter the VLAN ID used for this configuration here. This value must be between 
1 and 4094. 
Action  Select the action that will be taken here. Options to choose from are Add, 
Remove, Tagged, and Untagged. 
Add Mode  Select whether to add an Untagged or Tagged parameters. 
Allowed VLAN Range  Enter the allowed VLAN range here. 
Clone  Select this option to enable the clone feature. 
From Port - To Port  Select the range of ports that will be used in the clone feature here. 
Click the Apply button to accept the changes made. 
Click the Back button to discard the changes made and return to the previous page. 
 
When Trunk was selected as the VLAN Mode, the following page will appear. 
 
Figure 5-23 VLAN Interface (Trunk) Window 
 
The fields that can be configured are described below: 
Parameter  Description 
VLAN Mode  Select the VLAN mode option here. Options to choose from are Access, 
Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous, 
and Trunk Secondary. 
Acceptable Frame 
Select the acceptable frame behavior option here. Options to choose from are 
Tagged Only, Untagged Only, and Admit All. 
Ingress Checking  After selecting Trunk as the VLAN Mode the following parameter will be 
available. Select to enable or disable the ingress checking function. 
Native VLAN 
Tick this option to enable the native VLAN function. Also select if this VLAN 
supports Untagged or Tagged frames.