DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
123
To view the following window, click L2 Features > VLAN > Private VLAN, as shown below:
Figure 5-37 Private VLAN Window
The fields that can be configured for Private VLAN are described below:
Parameter Description
VID List Enter the private VLAN ID list here.
State Select to enable or disable the private VLAN state here.
Type
Select the type of private VLAN that will be created here. Options to choose
from are Community, Isolated, and Primary.
Click the Apply button to accept the changes made.
The fields that can be configured for Private VLAN Association are described below:
Parameter Description
VID List Enter the private VLAN ID list here.
Action
Select the action that will be taken for the private VLAN here. Options to
choose from are Add, Remove, and Disabled.
Secondary VID List Enter the secondary private VLAN ID here.
Click the Apply button to accept the changes made.
The fields that can be configured for Private VLAN Host Association are described below:
Parameter Description
Unit Select the Switch unit that will be used for this configuration here.
From Port - To Port Select the range of ports that will be used for this configuration here. Select the
Trunk option to specify that the trunk port will be associated with the private
VLAN host association.
Primary VID Enter the primary private VLAN ID here.
To Next Page
Loading...
