DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
162
The fields that can be configured are described below:
Parameter Description
Minimum Version Select the minimum version of MLD hosts that is allowed on the VLAN. Options
to choose from are 1 and 2.
Fast Leave
Select this option to enable or disable the MLD snooping Fast Leave function. If
enabled, the membership is immediately removed when the system receives
the MLD leave message.
Report Suppression Select this option to enable or disable the report suppression.
Suppression Time Enter the interval of suppressing duplicate MLD reports or leaves. The range is
from 1 to 300.
Proxy Reporting Select this option to enable or disable the proxy-reporting function.
Source Address Enter the source IP of proxy reporting. This is available when Enabled is
selected in Proxy Reporting.
Mrouter Port Learning Select this option to enable or disable Mrouter port learning.
Querier State Select this option to enable or disable the querier state.
Query Version Select the general query packet version sent by the MLD snooping querier.
Options to choose from are 1, and 2.
Query Interval
Enter the interval at which the MLD snooping querier sends MLD general query
messages periodically. The range is from 1 to 31744.
Max Response Time Enter the maximum response time, in seconds, advertised in MLD snooping
queries. The range is from 1 to 25.
Robustness Value Enter the robustness variable used in MLD snooping. The range is from 1 to 7.
Last Listener Query Interval Enter the interval at which the MLD snooping querier sends MLD group-specific
or group-source-specific (channel) query messages. The range is from 1 to 25.
Rate Limit
Enter the rate limit value here. The range is from 1 to 1000. Tick the No Limit
option to apply no rate limit on this profile.
Ignore Topology Change Select to enable or disable the Ignore Topology Change feature here.
Click the Apply button to accept the changes made.
MLD Snooping Groups Settings
This window is used to display and configure the MLD snooping static group, and view MLD snooping group.
To Next Page
Loading...
