DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
275
Parameter Description
TCP Flag Tick the appropriate TCP flag option to include the flag in this rule. Options to
choose from are ack, fin, psh, rst, syn, and urg.
This parameter is only available in the protocol type TCP.
Time Range
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Action Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Click the Back button to return to the previous step.
Click the Next button to continue to the next step.
IPv6
After clicking the IPv6 radio button and the Next button, the following window will appear.
Figure 8-6 ACL Configuration Wizard (Create, Packet Type, IPv6) Window
The fields that can be configured are described below:
Parameter Description
Sequence No.
Enter the ACL rule number here. This value must be between 1 and 65535.
Select Auto Assign to automatically generate an ACL rule number for this
entry.
Protocol Type Select the protocol type option here. Options to choose from are TCP, UDP,
ICMP, Protocol ID, ESP (50), PCP (108), SCTP (132), and None.
• Value - The protocol ID can also manually be entered here. The range is
from 0 to 255.
• Mask - After selecting the Protocol ID option, manually enter the protocol
mask value here. The range is from 0x0 to 0xFF.
• Fragments - Select this option to include packet fragment filtering.
To Next Page
Loading...
