DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
462
Authentication Fail
Trap Name Description OID
authenticationFailure An authenticationFailure trap signifies that the SNMPv2
entity, acting in an agent role, has received a protocol
message that is not properly authenticated. While all
implementations of the SNMPv2 must be capable of
generating this trap, the snmpEnableAuthenTraps object
indicates whether this trap will be generated.
1.3.6.1.6.3.1.1
.5.5
BPDU Protection
Trap Name Description OID
esBpduProtectionAttackOccur This trap is sent when the BPDU attack happened on an
interface.
Binding objects:
(1) ifIndex
(2) esBpduProtectionIfCfgMode
1.3.6.1.4.1.17
1.17.47.0.1
esBpduProtectionAttackRecover This trap is sent when the BPDU attack recovered on an
interface.
Binding objects:
(1) ifIndex
1.3.6.1.4.1.17
1.17.47.0.2
CFM
Trap Name Description OID
dot1agCfmFaultAlarm The trap is initiated when a connectivity defect is
detected.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
1.3.111.2.802.
1.1.8.0.1
CFM Extension
Trap Name Description OID
dCfmAisOccurred This trap is initiated when local MEP enters AIS status.
Binding objects:
(1) dCfmEventMdIndex
(2) dCfmEventMaIndex
(3) dCfmEventMepIdentifier
1.3.6.1.4.1.17
1.14.86.0.1
dCfmAisCleared This trap is initiated when local MEP exits AIS status.
Binding objects:
(1) dCfmEventMdIndex
(2) dCfmEventMaIndex
(3) dCfmEventMepIdentifier
1.3.6.1.4.1.17
1.14.86.0.2
dCfmLockOccurred This trap is initiated when local MEP enters lock status.
Binding objects:
(1) dCfmEventMdIndex
1.3.6.1.4.1.17
1.14.86.0.3
To Next Page
Loading...
