DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
72
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Interface Settings, as
shown below:
Figure 4-557 DHCPv6 Relay Interface Settings Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN Enter the interface VLAN ID used in the DHCPv6 relay here. The range is from
1 to 4094.
Destination IPv6 Address Enter the DHCPv6 relay destination address.
Output Interface VLAN
Enter the output interface VLAN ID for the relay destination here. The range is
from 1 to 4094.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DHCPv6 Relay Format Type Settings
This window is used to display and configure the DHCPv6 relay format type settings. This is used to configure
DHCPv6 relay Option 37 and Option 18 of the expert UDF string of each port.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Format Type
Settings, as shown below:
Figure 4-58 DHCPv6 Relay Format Type Settings Window
To Next Page
Loading...
