DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
88
The fields that can be configured are described below:
Parameter Description
Interval Enter the SIM topology display refresh interval value here. The range is from 10
to 300.
Show All Select this option to display all available SIM devices in the topology.
Show Member Only Select this option to only display SIM member devices in the topology.
Click the OK button to accept the changes made.
Click the Cancel button to discard the changes made.
Group
Add to Group
Select a Candidate Switch (CaS) from the list and then select this option (Add to Group) to add the selected CaS to
the SIM group. Password authentication is required when a CaS is added to the SIM group.
Figure 4-75 Add to Group (Input Password)
Enter the Password and click the Apply button to add the CaS to the SIM group.
Click the Cancel button to discard the addition and return to the Topology window.
Remove from Group
Select a Member Switch (MS) from the list and then select this option (Remove from Group) to remove the selected
MS from the SIM group.
Device
Configure
Select a device from the list and then select this option (Configure) to connect to the Web User Interface (if available)
on the selected device.
View
Refresh
Select this option to refresh the items displayed in the page.
To Next Page
Loading...
