DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
150
JWAC User Settings
To configure JWAC user settings for the Switch, go to the Security folder, open JWAC, and click JWAC User Settings, which
will open the following window:
Figure 9- 37. JWAC User Settings window
To set the User Account settings for the JWAC by the Switch, complete the following fields and then click the Add button. To
clear the current JWAC user settings in the table at the bottom of the window, click the Delete All button.
Parameter Description
User Name
Enter a username of up to 15 alphanumeric characters.
New Password
Enter the password the administrator has chosen for the selected user. This field is case-
sensitive and must be a complete alphanumeric string.
Confirm Password
Retype the password entered in the previous field.
VID(1-4094)
Enter a VLAN ID number between 1 and 4094.
Click Apply to implement changes made.
To Next Page
Loading...
