DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
56
SNMP Global State Settings
SNMP global state settings can be enabled or disabled on this window. To view the SNMP Global State Settings window, open
the SNMP Settings folder under Configuration and click SNMP Global State Settings entry. The following window should
appear:
Figure 6- 35. SNMP Global State Settings window
Click the
Apply
button to let your change take effect.
SNMP View Table
The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by a remote
SNMP manager. To view the SNMP View Table window, open the SNMP Settings folder under Configuration and click the
SNMP View Table entry. The following window should appear:
Figure 6- 36. SNMP View Table window
To delete an existing SNMP View Table entry, click the Delete button corresponding to the entry to delete. To create a new entry,
enter the information above the table and then click the Apply button.
The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous window.
The following parameters can set:
Parameter Description
View Name
Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
view being created.
Subtree OID
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree (MIB
tree) that will be included or excluded from access by an SNMP manager.
View Type
Select Included to include this object in the list of objects that an SNMP manager can
access. Select Excluded to exclude this object from the list of objects that an SNMP
manager can access.
To implement your new settings, click Apply.
To Next Page
Loading...
