DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
51
SNTP Settings
SNTP or Simple Network Time Protocol is used by the Switch to synchronize the clock of the computer.
The SNTP Settings folder contains two windows: Time Settings and Time Zone Settings.
Time Settings
To configure the time settings for the Switch, open the Configuration folder, click SNTP Settings, and then click the Time
Settings link, revealing the following window for the user to configure.
Figure 6- 31. Time Settings window
The following parameters can be set or are displayed:
Parameter Description
Status
SNTP State
Use this radio button to enable or disable SNTP.
Current Time
Displays the Current Time.
Time Source
Displays the time source for the system.
SNTP Settings
SNTP First Server
The IP address of the primary server from which the SNTP information will be taken.
SNTP Secondary Server
The IP address of the secondary server from which the SNTP information will be taken.
SNTP Poll Interval In
Seconds (30-99999)
The interval, in seconds, between requests for updated SNTP information.
Set Current Time
Date (DD/MM/YYYY)
Enter the current day, month, and year to update the system clock.
Time (HH:MM:SS)
Enter the current time in hours, minutes, and seconds.
Click Apply to implement your changes.
To Next Page
Loading...
