DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
213
Download Firmware
The following window is used to download firmware for the Switch.
Figure 12- 8. Download Firmware window
Enter the Server IP address in the first field and and specify the path/file name of the firmware in the third field. Select either IPv4
or IPv6. Select the desired Image ID, Active, 1 or 2. Click Download to initiate the file transfer.
Reboot System
The following window is used to restart the Switch.
Figure 12- 9. Reboot System window
Clicking the Yes radio button will instruct the Switch to save the current configuration to non-volatile RAM before restarting the
Switch.
Clicking the No radio button instructs the Switch not to save the current configuration before restarting the Switch. All of the
configuration information entered from the last time Save Changes was executed will be lost.
Click the Reboot button to restart the Switch.
To Next Page
Loading...
