DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
207
MLD Snooping Group
The following window allows the user to view MLD Snooping Groups present on the Switch. MLD Snooping is an IPv6 function
comparable to IGMP Snooping for IPv4. The user may browse this table by either VLAN Name or VID List present in the Switch
by entering that VLAN Name/VID List in the empty field shown below, and clicking the Find button.
To view the MLD Snooping Group window, open the Monitoring folder and click MLD Snooping Group.
Figure 11- 28. MLD Snooping Group window
Parameter Description
VID List/VLAN
Name
The VID List or VLAN Name of the multicast group.
Source
The source MAC address of the multicast group.
Group
The multicast group.
Port Member
The port members of this group.
Mode
The mode in current use.
NOTE: To configure MLD snooping for the Switch, go to the L2 Features folder and
select MLD Snooping > MLD Snooping Settings.
JWAC Host Table
To view the JWAC Host Table window, open the Monitoring folder and click JWAC Host Table.
Figure 11- 29. JWAC Host Table window
To Next Page
Loading...
