DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
54
MAC Notification Port Settings
To set MAC notification for individual ports on the Switch, open the Configuration folder, click MAC Notification Settings,
and click the MAC Notification Port Settings link, revealing the following window.
Figure 6- 34. MAC Notification Port Settings window
To change MAC notification settings for a port or group of ports on the Switch, configure the following parameters.
Parameter Description
From Port
Select a beginning port to enable for MAC notification using the pull-down menu.
To Port
Select an ending port to enable for MAC notification using the pull-down menu.
State
Enable MAC Notification for the ports selected using the pull-down menu.
Click Apply to implement changes made.
To Next Page
Loading...
