DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
210
Section 12
Save Services and Tools
Save Configuration ID 1
Save Configuration ID 2
Save Log
Save All
Configuration File Backup & Restore
Upload Log File
Reset
Download Firmware
Reboot System
The four Save windows include: Save Configuration 1, Save Configuration 2, Save Log, and Save All. Each version of the
window will aid the user in saving configurations to the Switch’s memory.
The options include:
• Save Configuration_ID_1 to save the configuration file indexed as Image file 1. To use this file for configuration it must be
designated as the Boot configuration.
• Save Configuration_ID_2 to save the configuration file indexed as Image file 2. To use this file for configuration it must be
designated as the Boot configuration.
• Save Log to save only the current log.
• Save All to save the current configuration file indexed as Image file 1 and save the current log.
Save Configuration ID 1
Open the Save drop-down menu at the top of the Web manager and click Save Configuration ID 1 to open the following
window:
Figure 12- 1. Save Configuration ID 1 window
To Next Page
Loading...
