D-Link DIR-895L

98D-Link DIR-895L User Manual
Section 4 - Conguration - Router Mode
DIR-895L HW:A1 FW:1.12
System
This page lets you save your router’s current settings to a le, restore your settings from a le, restore your
router to factory default settings, or reboot the device. Please note that restoring the settings to the factory
defaults will erase all settings, including any rules you have created.
Settings FeaturesHome Management
Management >> System
Save
System
Auto Reboot Conguration
System
Save Conguration To Local Hard Drive: Save
Load Settings From Local Hard Drive:
Select File
Restore To Factory Default Settings:
Restore
Reboot The Device: Reboot
Auto Reboot:
Never
⌵
COPYRIGHT © 2016 D-Link
Auto Reboot Conguration
Reboot The Device: Reboot
Auto Reboot:
Daily
⌵
Time: 00
⌵
00
⌵
(Hour/ Minute)
Auto Reboot Conguration
Reboot The Device:
Reboot
Auto Reboot:
Weekly
⌵
Date: Mon
⌵
Time: 00
⌵
00
⌵
(Hour/ Minute)
System
Save Settings To
Local Hard Drive:
This option allows you to save the current router conguration settings
to a le on your computer.
Load Settings
From Local Hard
Drive:
This option allows you to load a previously saved router conguration
le. This will overwrite the router’s current conguration.
Restore To Factory
Default Settings:
This option allows you to restore all conguration settings back to the
settings that were in eect at the time the router was shipped from the
factory. Any settings that have not been saved will be lost, including
any rules that you have created. If you want to save the current router
conguration settings, use the Save Settings To Local Hard Drive
button above.
Auto Reboot Conguration
Reboot The
Device:
Click to reboot the router immediately.
Auto Reboot: You may set the DIR-895L to automatically reboot at a set time. The
options are Never, Daily, Weekly. You may set the hour using a 24
hour format, the minute, and the day you wish to have the DIR-895L
automatically reboot.
Click Save when you are done.
System
This page allows you to save the DIR-895L's current conguration, load a previously saved
conguration, reset the router to its factory default settings, or reboot the DIR-895L.
From the Admin page, click System. To return to the Admin page, click Admin.