D-Link DIR-895L

82D-Link DIR-895L User Manual
Section 4 - Conguration - Router Mode
DIR-895L HW:A1 FW:1.12
Features >> Firewall Settings >> Advanced
Settings FeaturesHome Management
Save
Enable DMZ:
Enabled
DMZ IP Address:
<< Computer Name
⌵
IPv6 RulesIPv4 Rules
Firewall Settings
Your router’s high-performance rewall feature continuously monitors Internet trafc, protecting your network
and connected devices from malicious Internet attacks.
Enable SPI IPv4:
Disabled
Enable Anti-spoof Checking:
Disabled
IPv6 Simple Security:
Disabled
IPv6 Ingress Filtering:
Disabled
Advanced Settings ...
PPTP:
Enabled
IPSec (VPN):
Enabled
RTSP:
Enabled
SIP:
Enabled
Application Level Gateway (ALG) Conguration
COPYRIGHT © 2016 D-Link
Firewall Settings
The router’s rewall protects your network from malicious attacks over the Internet. In the
Features menu on the bar on the top of the page, click Firewall Settings. Click Advanced
Settings... to expand the list and see all of the options.
Enable DMZ: Enable or disable the Demilitarized Zone (DMZ). Enabling DMZ is not
recommended.
DMZ IP Address: If DMZ is enabled, enter the IP address of the client you wish to expose,
or use the drop-down menu to quickly select it.
Enable SPI IPv4: Enabling Stateful Packet Inspection (SPI) helps prevent cyber attacks
by validating that the trac passing through the session conforms
to known patterns.
Enable Anti-Spoof
Checking:
Enable this feature to protect your network from certain kinds of
“spoong” attacks.
IPv6 Simple
Security:
Enable or disable IPv6 simple security.
IPv6 Ingress
Filtering:
Enable or disable IPv6 ingress ltering.