D-Link DIR-895L

99D-Link DIR-895L User Manual
Section 4 - Conguration - Router Mode
Upgrade
This page allows you to upgrade the DIR-895L's firmware or language pack, either
automatically or manually. To manually upgrade the rmware or language pack, you must
rst download the relevant le from http://support.dlink.com.
In the Management menu on the bar on the top of the page, click Upgrade.
Firmware
Firmware
Information:
The current rmware’s version and date is displayed.
Check for New
Firmware:
Click this button to prompt the router to automatically check for a new
rmware version. If a newer version is found, you will be prompted to
install it.
Upgrade Manually
Upgrade
Firmware:
If you wish to upgrade the firmware manually, first download the
rmware le you wish to upgrade to. Next, click the Upgrade Firmware
button and browse to the le to install the new rmware. You can also
browse to a language pack le to install a new language pack.
DIR-895L HW:A1 FW:1.12
Upgrade
Your router can automatically detect rmware updates, but requires your authorization to install them. It is
also possible to check for new rmware manually, upgrade rmware from a local le.
Settings FeaturesHome Management
Management >> Upgrade
Firmware Information
Upgrade Manually
Current Firmware Version: 1.12, Tue 24 May 2016
Current Firmware Date: 2016-05-24 17:49:00
Check for New Firmware
Upgrade Firmware:
Select File
COPYRIGHT © 2016 D-Link
Firmware Information
New Firmware Version: Number here
New Firmware Date: Date here
Current Firmware Version: 1.12, Tue 24 May 2016
Current Firmware Date: 2016-05-24 17:49:00
Download New Firmware