D-Link DIR-895L

80D-Link DIR-895L User Manual
Section 4 - Conguration - Router Mode
Manage by Application
DIR-895L HW:A1 FW:1.12
Advanced >> QoS Engine
Save
Management type: Manage by Application
⌵
Uplink Speed (Mbps):
20
Downlink Speed (Mbps):
60
Settings FeaturesHome Management
Bandwidth
Detect Bandwidth
QoS Engine
Connect clients can be assign Internet access priority. Click and drag client cards into open slots.
Applications
Drag the app cards above to the Priority boxes below
Highest
Online Chat & Mail
High
Streaming Media
Medium
Games
Web & Social Network
File Transfer & P2P
Others
COPYRIGHT © 2016 D-Link
Manage by Application lets you prioritize specic kinds of trac across all connected
devices to optimize your Internet experience. Under Applications, there are six types of trac
cards: Streaming Media, Online Chat & Mail, Games, Web & Social Network, File Transfer &
P2P, and Others. If some are o-screen, you can use the arrow icons on either side of the
page to scroll through the cards.
One application can be assigned Highest priority.
Two applications can be assigned High priority.
Three applications can be assigned Medium priority.
If no applications types are explicitly assigned a priority, they will all be treated with equal
priority. If some devices are not assigned a priority and others are, the unassigned application
types will be treated with the lowest priority.
To assign a priority level to an application type, drag the desired card from the Applications
list over an empty slot and release the mouse button. The card will remain in the slot. If
you want to remove a priority assignment from an application type and return it to the
Applications list, click the x icon in the top right of the card.
For example, if you are experiencing poor quality VoIP phone calls or video chat due to
excessive downloads, you can use the conguration displayed to the right to prioritize your
calls and chats over other application types.
Be sure to keep your router rmware updated as new application trac denitions are
included.
Click Save when you are done.