D-Link DIR-895L

48D-Link DIR-895L User Manual
Section 4 - Conguration - Router Mode
Static IP
L2TP IP Address: Enter the IP address provided by your ISP.
L2TP Subnet
Mask:
Enter the subnet mask provided by your ISP.
L2TP Gateway IP
Address:
Enter the gateway IP address provided by your ISP.
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The recommended setting is Auto.
Click Save when you are done.
L2TP (continued)
Dynamic IP
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The recommended setting is Auto.
Address Mode: Dynamic IP
⌵
Primary DNS Server:
Secondary DNS Server:
MTU: Auto
⌵
COPYRIGHT © 2016 D-Link
Address Mode: Static IP
⌵
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP Address:
Primary DNS Server:
Secondary DNS Server:
MTU: Auto
⌵
COPYRIGHT © 2016 D-Link