D-Link DIR-895L

53D-Link DIR-895L User Manual
Section 4 - Conguration - Router Mode
Auto Detection
Select Auto Detection to automatically detect the IPv6 connection method used by your
Internet Service Provider (ISP). If Auto Detection fails, you can manually select another IPv6
connection type.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
LAN IPv6 Address Settings
LAN IPv6 Address: Displays the router’s LAN IPv6 Address link-local address.
LAN IPv6 Link-
Local Address:
Displays the router’s LAN link-local address.
My Internet Connection is: Auto Detection
⌵
DIR-895L HW:A1 FW:1.12
Settings >> Internet >> IPv6
SettingsHome Features Management
IPv4
Save
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
DNS Type:
Obtain a DNS server address automatically
⌵
IPv6 DNS SETTINGS
DNS Type: Use the following DNS address
⌵
Primary DNS Server:
Secondary DNS Server:
IPv6 DNS SETTINGS
Advanced Settings ...
LAN IPv6 ADDRESS SETTINGS
LAN IPv6 Address:
LAN IPv6 Link-Local Address: fe80::6e72:20ff:fe3e:3846