D-Link DIR-895L - Page 60

55D-Link DIR-895L User Manual
Section 4 - Conguration - Router Mode
Static IPv6
Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP).
Use Link-Local
Address:
Enable or disable link-local address use.
Default Gateway: Enter the default gateway for your IPv6 connection.
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
If Use Link-Local Address is disabled these additional parameters are available for
conguration:
IPv6 Address: Enter the address supplied by your ISP.
Subnet Prex
Length:
Enter the subnet prex length supplied by your ISP.
LAN IPv6 Address Settings
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-
Local Address:
Displays the router’s LAN link-local address.
My Internet Connection is: Static IPv6
⌵
DIR-895L HW:A1 FW:1.12
Settings >> Internet >> IPv6
SettingsHome Features Management
Use Link-Local Address:
Enabled
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
IPv4
Save
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
Use Link-Local Address:
Disabled
IPv6 Address:
Subnet Prex Length:
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
LAN IPv6 Address: /64
LAN IPv6 Link-Local Address: Not Available
LAN IPv6 ADDRESS SETTINGS
Advanced Settings ...