D-Link DIR-895L

72D-Link DIR-895L User Manual
Section 4 - Conguration - Router Mode
HT20/40
Coexistence:
(2.4 GHz):
Enable or disable HT20/40 Coexistence.
Visibility Status: The default setting is Visible. Select Invisible if you do not want to
broadcast the SSID of your wireless network.
Schedule: Use the drop-down menu to select a schedule to apply. The schedule
may be set to Always Enable, or you can create your own schedules
in the Schedules section. Refer to Schedule on page 94 for more
information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN disabled by default due to security vulnerabilities.
WPS-PBC Status: Enable or disable WPS-PBC fuctionality.
WPS-PIN Status: Enable or disable WPS-PIN functionality.
Click Save when you are done.
Secondary 5GHz
Advanced Settings ...
Status:
Enabled
Wi-Fi Name (SSID): Your_2nd_5G_Wi-Fi_Network
Password:
A_Str0nG_P@ssW0rd!%!
Security Mode:
WPA/WPA2-Personal
⌵
802.11 Mode: Mixed 802.11a/n/ac
⌵
Wi-Fi Channel: Auto
⌵
Transmission Power: High
⌵
Channel Width:
Auto 20/40/80 MHz
⌵
Visibility Status:
Visible
⌵
Schedule: Always Enable
⌵
Wi-Fi Protected Setup
WPS-PBC Status:
Enabled
WPS-PIN Status:
Locked