D-Link DSL-G2452DG User Manual

29D-Link DSL-G2452DG User Manual
Section 4 - Configuration
VDSL is one of the latest and fastest home broadband technologies. VDSL uses the DSL port
on your DSL-G2452DG to connect to the Internet. In order for your DSL-G2452DG to use
VDSL, you must configure the VDSL Settings, your ISP Settings, and your IPv4/IPv6 Settings.
WAN Access Type: Select VDSL to configure ADSL connection settings.
Interface: Select the interface from the drop-down menu. PTM0-PTM7 are
available. The default is PTM0.
Enable Interface: Select whether to enable or disable this interface.
ISP Settings
VLAN Tagged: Enable or disable VLAN tagging.
If you enabled VLAN Tagged, the following options are available:
VLAN ID: Enter the VLAN ID. The value should be 0, or 0-4079.
VLAN Priority: Enter the VLAN Priority from the default 0 (lowest) to 7 (highest).
Service Type: Select a service type from the list. Choose from INTERNET, TR069,
INTERNET_TR069. This information should be provided by your ISP.
If you are configuring your connection manually and your ISP has not
specified this setting, selecting INTERNET is recommended.
Proceed to IPv4 Settings on page 32 or IPv6 Settings on page 37.
VDSL

D-Link DSL-G2452DG Specifications

General

Brand	D-Link
Model	DSL-G2452DG
Category	Network Router
Language	English