42D-Link DSL-G2452DG User Manual
Section 4 - Configuration
From this page, you can configure your wireless network settings.
2.4 GHz
Status: Enable or disable the 2.4 GHz wireless network.
Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters.
Password: Create a password to use for wireless security.
Advanced Settings
802.11 Mode: Select the desired wireless networking standards to use. The available
options are 802.11b/g/n, 802.11n/g, 802.11n, 802.11b/g, 802.11g,
or 802.11b.
Security Mode: Choose None, WEP, WPA-PSK, WPA2-PSK or WPA-PSK/WPA2-PSK.
Wi-Fi Channel: Select the desired channel for your wireless network to use. The
default and recommended setting is Auto.
Transmission
Power:
Select the desired wireless transmission power. The available options
are High, Medium, and Low. The default is High.
Channel Width: Select Auto 20/40 if you are using both 802.11n and non-802.11n
devices, or select 20 MHz if you want to disable 40 MHz bandwidth
communication. The default setting is 20 MHz for maximum
compatibility.
Visibility Status: The default setting is Visible. Select Invisible if you do not want to
broadcast the SSID of your wireless network.
Note: Making a network Invisible is not a form of security alone.
Wireless
To Next Page
Loading...
