36D-Link DSL-G2452DG User Manual
Section 4 - Configuration
My Internet Connection is: Bridge
⌵
LAN Interface: LAN 1
⌵
Advanced Settings ...
MTU: Auto
⌵
Bridged
Select Bridge to configure the device as a network bridge.
IPv4 Settings:
My Internet
Connection is:
Select Bridged.
LAN Interface: Choose the interface to bridge.
Advanced Settings
MTU Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. Select either Auto or Manual.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Enable NAT: Enable or disable Network Address Translation.
Bridged Mode does not support IPv6 configuration. Click Save when you are done.
To Next Page
Loading...
