60D-Link DSL-G2452DG User Manual
Section 4 - Configuration
Port Triggering
Port forwarding allows you to specify a port or range of ports to open for specific devices
on the network. This might be necessary for certain applications to connect through the
router. In the Features menu on the bar on the top of the page, click Port Triggering.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to
edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click
the Add Rules button. If you edit or create a rule, the following options will appear:
Create New Rule
Enable: Enable or disable the rule.
Name: Enter a name for the rule.
Wan Interface: Select the interface to apply the rule to.
Protocol: Select either TCP, UDP, or TCP/UDP.
Start Port: Enter the starting port range to forward to.
End Port: Enter the ending port range to forward to.
Open Start Port: Enter the starting port range to open.
Open End Port: Enter the ending port range to open.
Click Apply when you are done.
To Next Page
Loading...
Need help?
General
