D-Link DWL-3500AP User Manual

D-Link Unified Access System Software User Manual
02/15/2011
Page 76 Document 34CS3000-SWUM104-D10
To view the list of failed APs by using the CLI, use the show wireless ap failure status command in Privileged
EXEC mode. To view the list of APs detected through the RF scan, use the show wireless ap rfscan status
command.
To add a failed or rogue AP to the local Valid AP database, use the procedures described in “Using the Local Database for
AP Validation” on page 72.

D-Link DWL-3500AP Specifications

General

Brand	D-Link
Model	DWL-3500AP
Category	Wireless Access Point
Language	English