27D-Link DWM-312 User Manual
Section 4 - Conguration
Dynamic VPN Settings (Cont)
Tick this box to enable Dead Peer Detection, then enter the time
in seconds after which a peer is determined to be no longer active.
You may also enter a delay period in seconds.
Select Server or None. If Server has been selected, set up XAUTH
user accounts in XAUTH Account on page 27.
Check this box to enable IKE Proposal.
Check this box to enable IPSec Proposal.
Use this area to Enable IKE Proposals. Then choose the
Encryption and Authentication types, as well as the DH Group
from the drop-down menus
Use this area to Enable IPSec Proposals. Then choose the
Encryption and Authentication types from the drop-down
menus.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
Dead Peer
Detection (DPD):
XAUTH:
Set IKE Proposal:
Set IPSEC
Proposal:
IKE Proposal
Settings:
IPSEC Proposal
Settings:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
