D-Link NUCLIAS CONNECT DAP-2680

25D-Link DAP-2680 User Manual
Web User Interface
IPv6
Enable IPv6 Check to enable the IPv6.
Get IP From Click the drop-down menu to select IPv6
address setting mode.
y Auto: Choose this option the DAP-2680 can
get IPv6 address automatically. The other
elds will be grayed out.
y Static: to set IPv6 address manually.
IP Address Enter the LAN IPv6 address.
Prex Enter the LAN subnet prex length value.
Default Gateway Enter the LAN default gateway IPv6 address.
Save Click to save the updated conguration.
To make the updates permanent, click
Conguration > Save and Activate.