94D-Link DAP-2680 User Manual
Troubleshooting
How to statically assign an IP address?
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
1. Windows® 2000: Click on Start > Settings > Control Panel > Network Connections.
Windows XP: Click on Start > Control Panel > Network Connections.
Windows Vista®: Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage network connections.
2. Right-click on the Local Area Connection which represents your network adapter and select Properties.
3. Highlight Internet Protocol (TCP/IP) and click Properties.
4. Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.
Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure
that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server
from your ISP.
5. Click OK twice to save your settings.
To Next Page
Loading...
