D-Link NUCLIAS CONNECT DAP-2680 - Wireless MAC ACL Filters

62D-Link DAP-2680 User Manual
Web User Interface
Filters
Wireless MAC ACL
The page allows the user to congure Wireless MAC ACL settings for access control.
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Access Control List Click the drop-down menu to select the access
control list. By default this feature is disabled.
y Select Disable to disable the lters function.
y Select Accept to accept only those devices
with MAC addresses in the Access Control
List. All other devices not on the list will be
rejected.
y Select Reject to reject the devices with MAC
addresses on the Access Control List. All other
devices not on the list will be accepted.
SSID Index Click the drop-down menu to select the SSID for
the specied wireless band.
MAC Address Enter each MAC address that you wish to
include in your lter list, and click Add.
MAC Address List When a MAC address is entered, it is added to
the following index. Highlight a listing and click
Delete to remove it from the index.
Current Client
Information
Displays information about all the current
connected stations.
Upload File To upload a ACL list le, click Choose File
and navigate to the ACL list le saved on the
computer, and then click Upload.
Download ACL File To download ACL list le, click Download and to
save the ACL list.
Save Click to save the updated conguration.
To make the updates permanent, click
Conguration > Save and Activate.