D-Link NUCLIAS CONNECT DAP-2680

64D-Link DAP-2680 User Manual
Web User Interface
IP Filter Settings
Enter the IP address or network address that will be used in the IP lter rule. For example, an IP address like 192.168.70.66 or a network address like
192.168.70.0. This IP address or network will be inaccessible to wireless clients in this network.
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
SSID Index Click the drop-down menu to select the SSID for
the IP lter.
Filter State Click the drop-down menu to enable or disable
the lter state. By default this feature is disabled.
IP Address Enter the IP address or network address.
Subnet Mask Enter the subnet mask of the IP address or
networks address.
IP Address List When an IP address is entered, it appears in the
list.
Highlight a IP address and click Delete icon to
remove it from the list.
Upload IP Filter File To upload a IP lter list le, click Choose File
and navigate to the IP lter list le saved on the
computer, and then click Upload.
Download IP Filter File To download IP Filter list le, click Download
and to save the IP lter list.
Save Click to save the updated conguration.
To make the updates permanent, click
Conguration > Save and Activate.