D-Link NUCLIAS CONNECT DAP-2680

31D-Link DAP-2680 User Manual
Web User Interface
Multi-SSID
The device supports up to four multiple Service Set Identiers. You can set the Primary SSID in the Basic > Wireless section. The SSID’s factory
default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.
Enable Multi-SSID Check to enable support for multiple SSIDs.
Enable Priority Check to enable the Priority function.
Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Index You can select up to three multi-SSIDs. With the
Primary SSID, you have a total of four multi-
SSIDs.
SSID This function is only available when Index
is not set to Primary SSID. Enter the Service
Set Identier (SSID) designated for a specic
wireless local area network (WLAN). The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
SSID Visibility This function is only available when Index is
not set to Primary SSID. Enable or Disable SSID
visibility. Enabling this feature broadcasts the
SSID across the network, thus making it visible
to all network users.
Security This function is only available when Index is
not set to Primary SSID. Click the drop-down
menu to select the security encryption, options
include: WPA-Personal, WPA-Enterprise, or
802.1X.
Priority This function is only available when Enable
Priority is selected. Click the drop-down menu
to select the priority level of the SSID selected.
The function is only available when Enable
Priority is checked.