D-Link NUCLIAS CONNECT DAP-2680

38D-Link DAP-2680 User Manual
Web User Interface
Intrusion
The Wireless Intrusion Protection window is used to classify APs as Valid, Neighborhood, Rogue, or a New group. Click Save for the changes to take
eect.
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Detect Click Detect to initiate a scan of the network.
AP List Click the drop-down menu to select All, Valid,
Neighbor, Rogue, and New.
The following is a denition of the listed AP
categories:
y Valid: An AP which is authenticated to the
network with encryption is classied as valid.
y Neighbor: A detected AP with a weak signal
strength is classied as a suspect neighbor.
y Rogue: An AP that has been installed on the
secure network without explicit authorization.
y New: An alternative category.
From the AP List select a detected AP and click
Set as Valid, Set as Neighborhood, Set as
Rogue, or Set as New to manually dene the
category type for the AP. Alternatively, click the
radio button to mark all new access points as
valid or rogue.
Save Click to save the updated conguration.
To make the updates permanent, click
Conguration > Save and Activate.