D-Link NUCLIAS CONNECT DAP-2680

63D-Link DAP-2680 User Manual
Web User Interface
WLAN Partition
The page allows the user to congure a WLAN Partition.
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Link Integrity Click the drop-down menu to enable or disable
the link Integrity function. If the Ethernet
connection between the LAN and the AP is
disconnected, enabling this feature will cause
the wireless segment associated with the AP to
be disassociated from the AP.
Ethernet to WLAN Access Click the drop-down menu to enable or
disable the Ethernet to WLAN access function.
When disabled, all data from the Ethernet to
associated wireless devices will be blocked.
Wireless devices can still send data to the
Ethernet.
Internal Station
Connection
Click the radio button to a specic mode. The
modes are dened as follows:
y Enable: Allows communication between
wireless clients connected to the same SSID
and wireless clients connected to dierent
SSIDs congured on this access point.
y Disable: Disallows communication between
wireless clients connected to the same SSID,
while allowing communication between
wireless clients congured on this access
point which are connected to dierent SSIDs.
y Guest: Disallows communication between
wireless clients congured on the access
point even when connected to the same or
dierent SSIDs.
Save Click to save the updated conguration.
To make the updates permanent, click
Conguration > Save and Activate.