D-Link NUCLIAS CONNECT DAP-2680

79D-Link DAP-2680 User Manual
Web User Interface
Limit Administrator
VLAN ID
Check the box and the enter the specic VLAN
ID that the administrator will be allowed to log
in from.
Limit Administrator IP Check the box to enable the limit administrator
IP address.
IP Range Enter the IP address range that the
administrator will be allowed to log in from and
then click Add.
Note: To save the new conguration settings to the rmware, click
Conguration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
Limit Administrator
Check one or more of the eight main categories to display the various hidden administrator parameters and settings displayed on the next ve
pages. Each of the eight main categories display various hidden administrator parameters and settings.
System Name Settings
System Name Enter the name of the device. The default name
is D-Link DAP-2680.
Location Enter the physical location of the device, e.g.
72nd Floor, D-Link HQ.
MDNS Name Enter the name of the multicast DNS. The
default name is dap2680.
Note: To save the new conguration settings to the rmware, click
Conguration > Save and Activate, otherwise click Discard Changes to
delete any setting change.