D-Link NUCLIAS CONNECT DAP-2680

29D-Link DAP-2680 User Manual
Web User Interface
Wireless Resource
The Wireless Resource Control window is used to congure the wireless connection settings so that the device can detect the better wireless
connection in your environment.
Airtime Fairness Click the drop-down menu to enable or disable
the airtime fairness function.
Band Steering Click the drop-down menu to enable the Band
Steering function. When the wireless clients
support both 2.4GHz and 5GHz and the 2.4GHz
signal is not strong enough, the device will use
5GHz as higher priority.
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Connection Limit Click the drop-down menu to enable or disable
the connection limit function. The option is for
load balancing. This determines whether to limit
the number of users accessing this device. The
exact number is entered in the User Limit eld
below. This feature allows the user to share the
wireless network trac and the client using
multiple APs. If this function is enabled and
when the number of users exceeds this value,
or the network utilization of this AP exceeds
the percentage that has been specied, the
DAP-2680 will not allow clients to associate with
the AP.
User Limit (0 - 64) This function is only available when Connection
Limit is enabled. Set the maximum amount of
users that are allowed access (0 - 64 users) to the
device using the specied wireless band.