45D-Link DAP-2680 User Manual
Web User Interface
Get IP From Click the drop-down menu to select IP address setting mode.
y Static IP (Manual): Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP
address to the DAP-2680.
y Dynamic IP (DHCP): The other elds will be grayed out. Please allow about 2 minutes for the DHCP client to be functional
once this selection is made.
IP Address Assign a static IP address that is within the IP address range of your network.
Subnet Mask Enter the subnet mask. All devices in the network must share the same subnet mask.
Gateway Enter the IP address of the gateway/router in your network.
DNS Enter a DNS server IP address. This is usually the local IP address of your gateway/router.
Edit Click to edit the selected entry.
Delete Click to delete the selected entry.
Save Click to save the updated conguration. To make the updates permanent, click Conguration > Save and Activate.
To Next Page
Loading...
