2-13
INSPECTIONS / ADJUSTMENTS
REAR CUSHION
• Compress the rear cushion up and down several
times to check the operating conditions.
• Check the rear cushion for oil leakage, parts
damage or looseness
.
BOLTS, NUTS, FASTENERS
• Check that all frame nuts and bolts are tightened to
their correct torque values. (⇨2-3)
• Check that all safety clips, hose clamps and cable
stays are in place and properly secured.
WHEEL INSPECTION
• Erect the motorcycle with the main stand.
• Check a wear of the rear fork bush by moving the
rear wheel aside. If there is a free play, replace the
rear fork bush.
•Tighten all nuts and bolts of the rear suspension.
FRONT FORK
• Hold the brake lever, and compress the front fork up
and down several times to check the operating
conditions.
• Check the front fork for oil leakage, parts damage
or looseness.
SUSPENSION
•Do not ride motorcycle with an unsatisfactory
suspension. Loose or worn suspension parts will
lead to deterioration in the vehicle's safety and
operation efficiency.
To Next Page
Loading...
