©
200416 3-3
Inspection and adjustment
CE ENGINE INLET/EXHAUST SYSTEM
ΧΦ65/75/85 series
4
3
3.3 INSPECTING TURBOCHARGER RADIAL BEARING PLAY
Note:
The turbocharger radial bearing play should only
be checked when the engine is cold.
1. Remove the turbocharger from the exhaust
manifold. See "Removal and installation".
2. Fit a pressure gauge to the turbocharger
housing and measure the radial play.
Compare the reading with the specified
value; see "Technical data". Replace the
turbocharger if necessary.
3. Fit the turbocharger. See "Removal and
installation".
i400650
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
