CE ENGINE INLET/EXHAUST SYSTEM
4-8
©
200416
Removal and installation
3
ΧΦ65/75/85 series
4
4.4 REMOVAL AND INSTALLATION, GLOW PLUG
Removing the glow plug
1. Remove the inlet manifold.
2. Remove the attachment bolts from the glow
plug and remove the glow plug.
Installing the glow plug
1. Fit the glow plug and tighten the attachment
bolts to the specified torque. See "Technical
data".
2. Fit the inlet manifold.
M201155
https://www.truck-manuals.net/