©
200416 5-5
Removal and installation
CE ENGINE FUEL SYSTEM
ΧΦ65/75/85 series
4
2
5. Install the nut (1) and tighten it to the
specified torque. See "Technical data".
6. If the fuel rail was removed, re-fit it.
7. Fit the injector pipes.
8. Start the engine to bleed the high-pressure
section of the fuel system and inspect the
fuel system for leaks.
1
i400486
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
